YG SONJA 3.3 落地喇叭 (Sonja 1.1 + 1.2 + 1.3)，以高精密度技術，將航太級鋁錠以 CNC 加工，打造絕佳喇叭箱體，成就大頻寬、大動態、極低失真的卓越表現。
YG Acoustics 核心技術：
CabinetTechnology 箱體技術，以整塊航太級鋁錠 CNC 製成。
FocusedElimination 消除共振技術，透過精準箱體幾何設計，從源頭將箱體內可能產生的駐波根絕。
DualCoherent 分音器技術，兼顧頻率響應與時間相位一致。
ToroAir 環形電感，讓低音運動更線性、更有衝擊力、更清晰。
ForgeCore 超低失真高音。
BilletDome 高音單體，以無共振軟圓頂振膜、CNC 製成鋁合金框架，完美結合軟絲質振膜與金屬振膜優點。
BilletCore 鋁合金振膜，以整塊鋁錠 CNC 製成，輕薄且表面應力平均。
ViseCoil 低音電感，安裝在鋁合金框架中，消除運作時的振動與縮小誤差。
SONJA 3.1：$2,650,000
SONJA 3.2：$4,100,000
SONJA 3.3：$6,100,000
SONJA 3C：$1,540,000
SONJA 3.2 BASS MODULE：$2,050,000
SONJA 3.3 BASS MODULE：$2,350,000
SPEAKER TYPE
3-way passive floor-standing loudspeaker
Dual layer aerospace aluminum cabinet with constrained layer damping
DRIVERS
Lattice hybrid tweeter with advanced airframe
Dual 15 cm (6”) BilletCore driver with advanced neodymium motor magnets
Dual 26 cm (10.25”) BilletCore driver with ultra-high field strength motor
CROSSOVER
Ultracoherent crossovers at 90 Hz and 1.85 kHz
Exceptional phase alignment: ±5° relative phase over range where driver relative output is within 20 dB
Optimized for phase alignment, phase slope and transient response Custom capacitors including pure metal foil models
Advanced resistors including multiple foil resistors for exceptional imaging and transient response
Advanced resonance-damped inductors Computationally optimised layouts to minimise component interactions
RESPONSE
Usable output extends from below 20 Hz to 40 kHz
Exceptionally low distortion throughout range
Excellent pair matching
SENSITIVITY：88 dB
IMPEDANCE：4 Ohms average、2.8 Ohms minimum
DIMENSIONS (H × W × D)：179 × 43 × 72 cm
WEIGHT：225 kg per speaker
FINISHES
Standard finishes are silver and black
Please contact your dealer for other finish options
